Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Buddy
I have switched out, made, and reinstalled many a stock shield and oval. The easiest and least intrusive way that I have found is. Heat up a 1/4 inch rod to red hot, press it to the center of the shield and add mild pressure. As the shield heats up it will sink deeper into the stock and the nails will expose the heads. Pull the nails and the shield will pop right out, without damaging the shield of the stock.
Brad
The Following 6 Users Say Thank You to Brad Bachelder For Your Post:
Threaded Mode