Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Randy thank you that explains a lot since I’ve seen many times references to screws not aligning properly. I assumed they were just not lined up by tightening properly because of a lazy gunsmith. Again I learn every day and thank you.
__________________ Nothing ruins your Friday like finding out it's only Tuesday
Andy that could actually be the case here as both of those screws have migrated slightly to the left indicating that they are loose. They just may need to be tightened, but on the other hand they could also be in the wrong holes. I am speaking of the two most forward screws on the floor plate and not of the rear screw nearest the trigger bow.
Andy that could actually be the case here as both of those screws have migrated slightly to the left indicating that they are loose. They just may need to be tightened, but on the other hand they could also be in the wrong holes. I am speaking of the two most forward screws on the floor plate and not of the rear screw nearest the trigger bow.
Looking at it makes sense and I at least gathered that much. Yeeehahhha!!!
__________________ Nothing ruins your Friday like finding out it's only Tuesday
02-18-2021, 09:30 PM
Hybrid Mode