Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I have brass, al, and steel molds and have never used a release. Just heat them hot enough and the lead won't stick. I usually lay them on the top of the melted lead and use a propane torch. Once hot enough it takes 10 seconds or so for the the lead to get hard in the mold. Then you'll start getting nice balls with no wrinkles. Paul
Hybrid Mode