Quote:
Originally Posted by Drew Hause
The 1907 Hunter Arms Chamber Specifications drawing shows the forcing cones as slightly less than 1/2" and a straight taper. The cone angle was shallower in the 1935 drawings with a length of about 5/8".
Austin Hogan stated that, at least early on, the Parker cones were cut at a Ogee rather than a simple taper; this illustration is obviously exaggerated. I've been looking for his posted WT numbers in my files without success.
Was this cone profile continued throughout production? |
Austin’s research also indicated the chokes were cut (or bored) at an ofee as well and he believed from the many Parkers he examined that this practice continued until Remington cut the chokes at an angle rather than continue the more precise and labor intensive practice of cutting them at an ogee. I don’t know if this also applies to the chambers/cones.
.
__________________
"I'm a Setter man.
Not because I think they're better than the other breeds,
but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture."
George King, "That's Ruff", 2010 - a timeless classic.
|
Threaded Mode