Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Cameron, take a 1/2" wood dowel 4" long. Drill a 1/8"hole in the center of the dowel 1/2" deep. Now take a 4-40 or 5-40 screw at least 1-1/4" long and generate a 1/2" radius using a propane torch. Epoxy the screw in the dowel and allow it to cure. Its ready for use. The die sinker file I use is German and will set you back about $40. Mine was given to me. I would not recommend the cheap Chinese die sinker files for mullered borders.
Hybrid Mode