Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
A cheap tool that one of the local pros use is fabricated from an extra long 4-40 or 5-40 screw. Generate an approximate 1/2" radius to the screw, heat works, and remove the head. Drill hole in wood dowel and epoxy the screw in the hole. I have used a 1/8" die sinkers file for many years. I ground half the file away so I could see where I was going.
Threaded Mode