Could use some help on primers

[Mark Garrett]

Byron , that load is so low pressure that I see no problem with making the primer change.

I had that load tested with both the W209 and the Fed209a , both loads were so close in velocity and pressure I would consider them identical . The Fed209a primer is usually considered the hottest primer.

[Byron Teates]

Mark,

Thank you for the prompt reply. It may have been you that posted my original load that had been tested by Tom. I found the load on 16ga society. If that was you thank you for that post, and thank you for the current comments.

Thanks again,

Byron...

[Mark Garrett]

Yes I posted them on the 16ga forum . I have shot this load quite a bit and really like it .

Loaded it with the cheddite primers also .

Also loaded it with 18grs .