![]() |
![]() |
![]() |
|||||||||||||||||||||||||||||||||||||||
|
![]() |
![]() |
![]() |
#3 | ||||||
|
![]()
At the present I’ve got 25 new hulls and 25 already fired hulls . So I loaded one of each . Loaded a fired one first , only problem was getting it out of the depriming sizer station next time I’ll use Imperial Sizing die wax on the brass .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to CraigThompson For Your Post: |
![]() |
![]() |
![]() |
#4 | ||||||
|
![]()
Also loaded three with 0000 buckshot . Tried the first without buffer and then two with buffer . Ten of the 0000 buck pushed by 31 grains of Clays . In the two buffered I also put an overshot card just to try and keep the buffer from sifting out the tiny hole in the middle of the crimp .
__________________
Parker’s , 6.5mm’s , Mannlicher Schoenauer’s and my family in the Philippines ! |
||||||
![]() |
![]() |
![]() |
![]() |
![]() |
The Following User Says Thank You to CraigThompson For Your Post: |
![]() |
|
|