All brass hulls

[charlie cleveland]

will have to try some of those brass shell loads...thanks for the info..have you loaded any of the10 ga brass do you get a lot of reloads per shell out of the brass shell....i really like reloading my own shells makes the hunt a little better it seems..... charlie

[Roundsworth]

Jim, what gave the best results in your 12 gauge loads, fiber or one-piece plastic wads? I would be leaning toward a 1 ounce load of 7-1/2 shot for my 1877 Lifter. All I hunt is Ruffed Grouse. So far the RMC loading tool scores high with users. Do you have their loading tool?

[Jim Schultz]

Charlie,
I don't load 10 gauge, but Dave Casey told me that he knows a Cowboy Action shooter that has loaded his RMC hulls over 3000 times. At some point the primer pockets become worn and Dave bores out the back of the hull and threads in a new primer pocket, which is cheaper than buying a new hull.

Mark,
Let me preface my answer with I believe that all barrels are unique and what works for me may not work for you.
MY 12 gauge hulls are loaded with 1-piece plastic wads, non-toxic and though they are adequate, I consider them a work in process. My 1 ounce loads are card and fiber in 16 gauge and I doubt that I could improve on the results. They pattern consistently at the distances I shoot, are low pressure and depending on powder charge, the velocities according to my Chronograph are 1238 and 1328 fps. respectively. Yes, I have Dave's loading tools. He also made me some dippers for field loading from scrap large bore rifle cases and I put wood handles on them. I carry a "loading box" with all of the tools, some powder, shot, primers, shot/powder dippers and cards and filler wads to reload in the field.

[Mike Stahle]

If any of you brass shell reloaders are interested I have the following for sale.
I have since moved into the loading of paper roll crimp shotshells.
4 Boxes Primed12ga Magtech Shotshells.
$85.00 shipped.
http://www.buffaloarms.com/browse.cfm/4,4675.html
Included are two boxes of CCI large pistol primers.
Shot/powder dipper.
Handmade brass loading tools (these will only work in the Magtech 12ga shells)

[Cyril Bodnar]

Mike... PM sent.

[Jim Schultz]

I'm assuming that everyone knows that Mag Tech brass hulls are best suited for black powder using card and fiber components.

[Mike Stahle]

Originally Posted by Cyril Bodnar

Mike... PM sent.

ALL ITEMS SOLD TO THIS PARKER FORUM BROTHER.