Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Bill, use a piece of soft wood or the edge of a wood table to carefully push the ejector hammer at the top of the forend back into place until it hopefully clicks. If it clicks into place, the ejector sear is not broken, but possibly filled with dirt or rust. Hold the forend very tight while you are doing this. Now install the forend and the triggers may work. Don't take it apart again. Let us know if you are successful.
Hybrid Mode