|
 |
 |
||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
 |
 |
07-10-2018, 12:36 PM
|
#23 | ||||||
|
That’s interesting. I’ve always used the alkenet stain after all the pores are filled and let it sit for at least 24 hours. But I am going to try Brian’s method with my next stock. Great tip. I made up a batch of alkenet root stain years ago and I still have a lot left. I boil the alkenet roots in linseed oil and then leave the roots in the jar for storage.
I now use Timberluxe but I don’t seal the stock with it. It’s too expensive and I like off the shelf tung oil for sealing since it works well and is inexpensive. I go through a lot of tung oil filling the stock using the mud method. |
||||||
|
|
||||||
 |
 |
 |
| The Following User Says Thank You to Tom Flanigan For Your Post: |
|
alkenet root | |
|
07-10-2018, 02:08 PM
|
#24 | ||||||
|
alkenet root
where can you find alkenet root, I would like to mix my own stain.
Ron Moore |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-10-2018, 02:22 PM
|
#25 | ||||||
|
I bought some on EBay.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
07-10-2018, 02:23 PM
|
#26 | ||||||
|
I haven't bought it in years but I think I got it from somwhere in England. But you should be able to find it on the internet. I used the actual roots and not the powder that is sometimes sold. I filled a coffee can half full of the root and then filled the can level with linseed oil. If I was to do it again, I would use tung oil for the faster drying time. I boiled the root in oil but you have to be very careful to take it off the stove at the first sign of a boil. If left, it will flow over and make a hell of a mess.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
07-11-2018, 12:09 PM
|
#27 | ||||||
|
Ordered some last night to try on the Trojan I have coming my way. Got a call from Brian Board this morning just to verify the humidity levels I would be dealing with and to give me some advice on the application of the finish and the stain. Had a pleasant talk with him afterwards regarding when he worked on Parkers for Herschell Chaddick and he told me about an AH grade he refinished about 16 months ago. Seems like a pleasant fellow.
__________________
"The Parker gun was the first and the greatest ever." Theophilus Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-11-2018, 12:23 PM
|
#28 | ||||||
|
Brian is a very pleasant fellow and he knows his stuff! What an artist he is in his craft!
You should see his duck calls with AA Parker checkering. .
__________________
"I'm a Setter man. Not because I think they're better than the other breeds, but because I'm a romantic - stuck on tradition - and to me, a Setter just "belongs" in the grouse picture." George King, "That's Ruff", 2010 - a timeless classic. |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-11-2018, 12:28 PM
|
#29 | ||||||
|
He's got some nice ones on his website, but I don't think my extremely limited duck shooting warrants that quality of a duck call
__________________
"The Parker gun was the first and the greatest ever." Theophilus Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Bill Holcombe For Your Post: |
|
|
|
10-02-2018, 02:48 PM
|
#30 | ||||||
|
I have some Winchester Red Oil on order. How much different is it to work with than the others? Can I build up the top coat with Tu-oil?
|
||||||
|
|
|
||||||
|
|
|
 |
|
|
Linear Mode
