Quote:
Originally Posted by Tom Flanigan
Just scan any of the sales sites and look for guns that have 30” or more barrels and the chokes are stated to be cylinder or improved cylinder. Chances are that the chokes have been messed with. Parker no doubt built 30” or better guns with open chokes but this is not typical. I would hold suspect any 30” or better gun with chokes other than modified or full. It may be original, but the odds are long.
|
Funny you mention that, I just picked up a Lefever F grade 10ga, a pivot lever rod cocker. It has 30" barrels and the chokes are R Cylinder and L .018. The muzzle shows no evidence of cut barrels. The left barrel has 5" inches of continuous taper to the muzzle. Factory or relieved? It also weighs 8 lbs 2 ounces so given the long continuous taper in the barrel with choke and it's light weight for a 10 bore it may very well have been ordered as an upland gun. The price was right either way and I am looking forward to shooting it.
P.S. When it comes to superb work in choking, Ithaca NID's and Rem 94's will often pattern tighter at 40 yards than any Parker.
Threaded Mode