Patience...

[Bill Murphy]

Listen carefully. If you are not a carpenter and want to get your stuff under control, contact the people that I contacted to get my stuff under control. sales@7.62x54R.net They are a very professional Georgia company that manufactures completely finished gun racks that are screwed to your walls, in any design that you select from their voluminous selection on their website. Their main clientelle seems to be collectors who want to display their 7.62X54 Mosin Nagant rifles. The owner of the company is a serious historian on Mosin Nagants. However, I seriously turned their business around to build racks for shotguns, two level easy access racks, custom cut for single barrel, double barrel, you name it, with butts cut for eight gauge guns if you wish. Their standard rifle butt cuts are way too narrow for our shotguns. Specify butt trays at six and a half inches minimum. Everything comes in shrink wrapped packaging and no mistakes. Save money by ordering the racks unfinished. Mine are still unfinished and they look just fine. Two of my shooting buddies are semi-professional woodworkers and recommended that I use these people. One of my buddies has headed up the installation of my racks and is very impressed with 7.62X54R.net and their craftsmanship and prices. Your only job is to determine the distance from the top butt placement to the ceiling to accommodate your longest gun.
Then you don't have to worry about the floor to second level support. It is predetermined. The butt section of the top level guns is the barrel rest for the lower level guns, one piece of lumber. I think this is a design feature they created for my racks. You do have to specify the shape, (square or round) of the barrel channels, depending on whether you are racking single barrel or double barrel guns. Contact me by PM if you have questions.

[TxHuntermn]

Originally Posted by Bill Murphy

Listen carefully. If you are not a carpenter and want to get your stuff under control, contact the people that I contacted to get my stuff under control. sales@7.62x54R.net They are a very professional Georgia company that manufactures completely finished gun racks that are screwed to your walls, in any design that you select from their voluminous selection on their website. Their main clientelle seems to be collectors who want to display their 7.62X54 Mosin Nagant rifles. The owner of the company is a serious historian on Mosin Nagants. However, I seriously turned their business around to build racks for shotguns, two level easy access racks, custom cut for single barrel, double barrel, you name it, with butts cut for eight gauge guns if you wish. Their standard rifle butt cuts are way too narrow for our shotguns. Specify butt trays at six and a half inches minimum. Everything comes in shrink wrapped packaging and no mistakes. Save money by ordering the racks unfinished. Mine are still unfinished and they look just fine. Two of my shooting buddies are semi-professional woodworkers and recommended that I use these people. One of my buddies has headed up the installation of my racks and is very impressed with 7.62X54R.net and their craftsmanship and prices. Your only job is to determine the distance from the top butt placement to the ceiling to accommodate your longest gun.
Then you don't have to worry about the floor to second level support. It is predetermined. The butt section of the top level guns is the barrel rest for the lower level guns, one piece of lumber. I think this is a design feature they created for my racks. You do have to specify the shape, (square or round) of the barrel channels, depending on whether you are racking single barrel or double barrel guns. Contact me by PM if you have questions.

BILL, THAT sounds like the perfect solution....Look forward to deeper inquiry!

[Randy Roberts]

Originally Posted by Bill Murphy

Listen carefully. If you are not a carpenter and want to get your stuff under control, contact the people that I contacted to get my stuff under control. sales@7.62x54R.net They are a very professional Georgia company that manufactures completely finished gun racks that are screwed to your walls, in any design that you select from their voluminous selection on their website. Their main clientelle seems to be collectors who want to display their 7.62X54 Mosin Nagant rifles. The owner of the company is a serious historian on Mosin Nagants. However, I seriously turned their business around to build racks for shotguns, two level easy access racks, custom cut for single barrel, double barrel, you name it, with butts cut for eight gauge guns if you wish. Their standard rifle butt cuts are way too narrow for our shotguns. Specify butt trays at six and a half inches minimum. Everything comes in shrink wrapped packaging and no mistakes. Save money by ordering the racks unfinished. Mine are still unfinished and they look just fine. Two of my shooting buddies are semi-professional woodworkers and recommended that I use these people. One of my buddies has headed up the installation of my racks and is very impressed with 7.62X54R.net and their craftsmanship and prices. Your only job is to determine the distance from the top butt placement to the ceiling to accommodate your longest gun.
Then you don't have to worry about the floor to second level support. It is predetermined. The butt section of the top level guns is the barrel rest for the lower level guns, one piece of lumber. I think this is a design feature they created for my racks. You do have to specify the shape, (square or round) of the barrel channels, depending on whether you are racking single barrel or double barrel guns. Contact me by PM if you have questions.

For those of you that may have an interest in gun racks for whatever purpose I thought I would mention that I have been in contact with the folks that Bill referred us to. I had an 8' section of wall in my gun room that I have been pondering on for a while so this spurred me on. I was a little skeptical at first as the owner (Ted) does everything by email. It did not take long to realize that he knew what he was doing. He worked up various drawings and was more than patient and responsive. In the end he came up with something I liked for my application and it has been ordered. Looks like mid July is the delivery date. Prolly do a separate thread on it when it's finished in case any members have an interest. Pic attached of the unit I ordered which is a 30 gun free standing unit. It will come unassembled but after viewing the assembly instructions/video on the website it should be childs play. I plan on finishing the unit myself. Thrilled with the process, now for the actual product, stay tuned. Also thanks to Bill Murphy who was kind enough to speak to me and some others as I understand it on these gun racks, Bill was most helpful !