|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
03-13-2018, 07:27 AM
|
#3 | ||||||
|
I do not have first hand experience so this is just a guess. A friend has been using Vectan/Noble Sport powder and he described it as being a flake powder green in color. I believe he has been using AO in 20 ga loads. He claims it is the powder loaded in the Herters shells Cabelas has been selling. It is fairly cheap and a 1# bottle actually contains 1.1 pounds making it even cheaper. I believe he gets it from Graff & Sons.
|
||||||
|
|
||||||
 |
 |
 |
|
|
|
03-13-2018, 07:49 AM
|
#4 | ||||||
|
I would be very reluctant to try to identify a powder by sight
And even more reluctant to try to replicate a load that way
__________________
"If there is a heaven it must have thinning aspen gold, and flighting woodcock, and a bird dog" GBE |
||||||
|
|
||||||
|
|
|
| The Following User Says Thank You to Rick Losey For Your Post: |
|
|
|
03-13-2018, 08:09 AM
|
#5 | ||||||
|
If you're THAT curious, why not phone RST? They MIGHT tell you the mgr. But for legal reasons, nothing else. And since most commercial powders are tailored for burn rate/specific loadings, it's NOT wise to reload this powder in anything - for any reason.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to John Campbell For Your Post: |
|
|
|
03-13-2018, 08:31 AM
|
#6 | ||||||
|
A rather complete set of loading data for Vectan powders is available and downloadable via the Graff & Sons web site. I just did a quick scan of the data and some combinations seem to yield low pressures if that is what you are trying to duplicate. There is a bunch of loads for Cheddite hulls.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Gary Laudermilch For Your Post: |
|
|
|
03-13-2018, 11:02 AM
|
#7 | ||||||
|
Thanks for the info Gary--I checked out those Vectan loads, and there are several good loads for those wanting lower pressures--too bad I ahve enough powder to last for a few years.
__________________
"How kind it is that most of us will never know when we have fired our last shot"--Nash Buckingham |
||||||
|
|
|
||||||
|
|
|
|
|
|
03-13-2018, 01:48 PM
|
#8 | ||||||
|
Gary,
Thanks for the lead on the powder. I went to the Graf's site and found the Vectan powder with 12 gauge low pressure loads. I will tone it down for 16 gauge. Vectan being an European manufacturer is selling their powder in 1/2 kg bottles which works out to 1.1 pounds. |
||||||
|
|
|
||||||
|
|
|
|
|
|
03-13-2018, 03:19 PM
|
#9 | ||||||
|
Paul, no need to guess as there are 16 ga loads listed in the loading data for Vectan powders. I see at least 3 loads under 8000 psi for 7/8 oz.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
03-14-2018, 10:51 AM
|
#10 | ||||||
|
The RST shells I have shot were very mild for recoil. I think they will tell you what kind of powder they use. Good luck - Paul
__________________
Paul Harm |
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Paul Harm For Your Post: |
 |
|
|
Linear Mode
