1922 GHE Damascus

[GH-16]

Originally Posted by Rick Losey

Paul

are you going to get your loads tested, and will you be willing share the results?

I've had quite the debate with myself over having them tested. I'm closely following a published recipe out of the BPI ITX manual. The load calls for 44gr blue dot, 1 3/8oz ITX original-10 shot in a roll crimped Cheddite hull = 1200fps @ 7300psi

I am going to shoot some of these tomorrow & run them over the crony. Will let you know my thoughts afterwards.

[OH Osthaus]

Originally Posted by Paul Ehlers

I've had quite the debate with myself over having them tested. I'm closely following a published recipe out of the BPI ITX manual. The load calls for 44gr blue dot, 1 3/8oz ITX original-10 shot in a roll crimped Cheddite hull = 1200fps @ 7300psi

I am going to shoot some of these tomorrow & run them over the crony. Will let you know my thoughts afterwards.

if you're using a tested published load- no need

i thought when you said you would work up a load- you were experimenting