Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
So here are the two types of roll pins that both fit the roll. The simple pin is from the Trojan. The screw and pin is from a hammerless gun. When you look at all those threads, then add moisture and 100 years you can imagine why it is so hard to undo the screw which is why we see so many buggered screw heads on the roll pin. Never really any need to remove these pins unless there is some major catastrophy.
Hybrid Mode