Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Rick,
I also have a "G" grade with damascus barrels. I load 17 grains of clay dot and 7/8 oz. of 71/2. According to Alliant's web site that puts this load at 5,000 to 5,200 psi and 1150 to 1200 fps. This is the only load I use in all three of my Parkers and I shoot twice a week. I know others use loads with somewhat higher pressures with no issues.
Tom
Threaded Mode