Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Or, you can measure between firing pin centers.
1 1/8" = #2
1 1/16" = #1
1" = #0
That covers the most common frames, 12-20 ga. There were some half sizes thrown in that will measure the same as the above, but those frames are materially narrower across the bolsters inasmuch as they were made for thin-walled barrels.
The Following 2 Users Say Thank You to WmRike For Your Post:
Hybrid Mode