Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I've always used a Coke can. I cut it a bit narrow so it can squeeze out if it's too thick. I also use Brad Bachelder - he has a guy who micro welds and then he fits it. Just depends if I feel cheap or want to spend the money [ ususally a $100 or so ]. I've never had any luck trying to glue / epoxy shims on - the stuff never sticks.
__________________
Paul Harm
The Following 2 Users Say Thank You to Paul Harm For Your Post:
Hybrid Mode