Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
In that serial number range, your gun could have left the factory with bores at approximately .775 or they could be bored at approximately .795 to .800. Anything much over .800 would be considered a gun that had been cleaned up. If your gunsmith does not have a bore micrometer, he is known in the trade as an average gunsmith, not one to work on or evaluate your or my gun.
The Following User Says Thank You to Bill Murphy For Your Post:
Hybrid Mode