Likely it wouldn't be too much trouble to bring the gun back to a pull trigger. Most conversions simply add a "hook" to the trigger to "catch" the hammer and then let it go when relaxing tension on the trigger. The pulling of the trigger still releases the hammer by raising the sear, but the hook catches the hammer. Often one can just do away with the "hook", cutting it off ect. and then adjusting the pull weight if needed. I would guess that you would spend $150 to $300 with a gunsmith and would suggest Phillips gunsmithing here Texas. He does a lot of trigger work for the trap shooting folks. Am not saying what Phillip would charge you, but from what I know of his rates I think my guess would be in line. Hope this helps. JH
|
Threaded Mode