SBT toplevers

[B. Dudley]

Interesting... If the trip blade is broken off, the. The lever would be held open and never be able to close since there is nothing for the barrels to hit and depress it away from the bolt.

A completely missing trip will cause or stuck trip will cause the situation you describe.

Unless your trip is both broken and stuck.

[Robt. Harris]

'Thanks' for the response, Brian. If it's alright, I'd like to call your office landline tomorrow to discuss what I have. I have the ability/experience and the correct driver bits to disassemble, and did so tonight, removing just the triggerplate.....but my trip release looks nothing like what one normally sees in a Parker, and it was not broken either. I'm hoping you might have some insight, as I am puzzled as to its configuration.

With appreciation,

Rob

[Pa SxS]

Possibly a home made or amateur gunsmith repair.

[Robt. Harris]

It appears as that is what it is, Chuck, as it looks nothing like the trip release mechanism in your standard Parker. That was Brian Dudley's opinion also this morning when it was discussed. He is furnishing me with what I need in parts to make it right. Middle- 60's dinosaur here with no digital camera or the know-how to post pics otherwise I'd show you what was incorrectly installed. Again, my 'Thanks' to all who chimed in.......

Rob

[Robt. Harris]

Hi Fellas,

This is just a follow-up to say ‘Thank You’ to Brian Dudley for supplying the correct part to get my SBT gun up and running again. First picture here is the brainstorm fabrication that someone thought should function as a top lever release mechanism. It didn’t, as the top lever would almost never stay captured to the right when the gun was opened. Next to it is the correct Parker release mechanism. This, when dropped in without modification, worked just at it should.

With the help and encouragement of PGCA member Mike Franzen, I’m also attaching a few pictures of this ‘B’ grade that were supplied to me by the seller at time of purchase a few years back. They’ll give you an idea as to the condition of this c.1930 single trap. It is a 32” gun without apparent modification other than a buttstock that has been refinished from the wrist checkering back. You’ll notice a somewhat severe gouge on the right-side stock tenon just under the checkered side panel where no refinishing was attempted. A new Hawkins repro pad also replaced the original Hawkins somewhere around this same time, according to seller. The forearm retains its original finish with a few attending handling marks. Stock has a thickish comb, a LOP of 14-3/16”, and the ‘initials’ shield in the toe-line of the buttstock remains blank. The gun doesn’t appear to have been shot all that much judging from the standing breech, barrel interior, top lever position, etc. I’ll let the experts here weigh in on remaining case colors, if they feel a need, but they certainly appear original bone-charcoal as for what’s left of them.

The gun’s nominal bore diameter is .733” and gradually tapers to .694” over 5 inches, for .039” of choke. There is no discernible parallel section near the muzzle. It’s a swell gun to shoot and does better for me at the longer handicap yardages than at the 16…..no small wonder with that amount of choke. Am not posting this for either approval or disapproval, as I like the gun just as is, and it has a home here for whatever time I’m around. The leather case in a couple of the upcoming photos is the period Redhead Brand ‘Elliot-style’ 32” trunk case that Parker supplied with these guns as an option. Hope you enjoy the photos and ‘Thanks’ also to those who initially responded to this thread.

All Best,

Rob Harris

[Robt. Harris]

A few more pics.....

[Robt. Harris]

A last few....sorry for the lack of quality.....but being done on the fly.

Rob