So in order to determine if the plate needs to have a bushing installed I would need to remove the hammer and I'm guessing the side plate? There is one screw and 5 pins. The screw is removed, thats easy. Do the pins have to be drifted and from which side if they do and are tapered? Is there anything else that needs to be done so that I don't have to be looking for pieces and parts all over the shop floor?
BTW, when the hammer is cocked it doesn't move at all. Well, not till I Pull the trigger.
Last edited by Matt Valinsky; 04-03-2014 at 11:20 PM..
Reason: Added info
|
Threaded Mode