Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Brian, double checked. Took the screw out and the hammer is very tight on the shaft and will not come off without some amount of help. What I see when I look at the hammer and firing pin is something less than 1/16" of seperation.
Also, the hammer moves back and forth from front to back and side to side. When moving towards the firing pin, it does not touch the firing pin. Hope that helps.
Last edited by Matt Valinsky; 04-03-2014 at 02:03 PM..
Reason: Added some info
Threaded Mode