Quote:
Originally Posted by Richard B. Hoover
Jack,
Your gun is a cylinder bore (no choke) 12-gauge.
If you want to shoot it you need to get some 12B brass shells and hand load them. The reason it is particularly interesting is that it is widely believed that the early 12 gauge Parker shotguns were significantly over bored. However the Parker order books show that almost all of the 11-gauge Parker's were chambered for the 12A brass shells. Bill Furnish and I measured a number of early under lifter Parker 12-gauge guns that were chambered for the smaller 12B (like your gun) or 11B (like John Hanson' no. 2505 Parker) brass shells.
These mysteries are finally beginning to make a lot of sense.
Thanks for your help.
Richard
|
NO!---Thanks for YOUR help!!! If it weren't for you and so many other dedicated authorities on these Parkers, I would never have gotten to the bottom of this story! When I bought the gun, it was advertised as a 14 gauge, and had it not been for you and the many, many others who helped me, I would have just assumed I had a 14 gauge! Thanks again! Jack.
Threaded Mode