Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
i had the stock off this past nov. the screws looked like i was the only one other than parker that turned them and i found no crack in the head of stock and clean oil free wood . the spanner wrench holes are set at the 9 and 3 oclock on both sides and a flush to sides of cheek wood. who ever did this did an outstanding job! anybody have one of this type of pin job? when this 10 ga came out on an action site there was a 12 ga just like it. i don't know what became of it. thanks scott
The Following User Says Thank You to scott kittredge For Your Post:
Threaded Mode