Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Great thread, Todd. Maybe we can get back to appreciating Parkers with this subject.
Here is an 1891 CH, one of the early hammerless C grades, on a #2 frame with 30" heavy Bernard 12ga barrels and 26" Damascus 10ga barrels. The 26 inchers are factory cylinder bored. With the Bernard 12's , the total gun weight is about 8 1/2 lbs, with the Damascus 10's, about 7 3/4.
The gun was proofed in 1891 with Wood's smokeless powder and intended by Parker to be used with smokeless powder. This gun was used in Portsmouth NH for most of its life, then acquired in poor condition by Austin Hogan. This was a project gun for Austin, who after substantial work on it, gifted the gun to me, and I put more time and money into it to get it to its present condition. Both barrels were loose against the frame standing breech face , and Larry Del Grego repaired the wear.
Its not perfect but really a nice gun, and I have shot waterfowl and pheasant with it. I am grateful to Austin to be its present caretaker.
The Following 13 Users Say Thank You to Bruce Day For Your Post: