Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Some of the floating pins had springs and some did not. And you cannot put springs in one that did not have them originally. The cavity for the pin is milled out differently.
Your pins may just be sticking due to dirt and crud in there. However, those retaining screws can be hard to get out withot messing them up if they are stuck.
Some good penetrating oil in there may help.
Threaded Mode