Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Make sure the stock repair has made the stock tight when wiggled side to side and up and down. There appears to be some room between wood and metal surfaces at the top tang, indicating possible looseness. Don't fire it until that is taken care of. By the way, the "ejectors" you describe are actually just one "extractor". Ejectors are split and spring operated which is not the case with your gun. Good luck with your new gun.
The Following User Says Thank You to Bill Murphy For Your Post:
Threaded Mode