Flues question

[Jim DiSpagno]

Not positive, bit I don't think so. If I remember correctly, 20 and 16 gauges used the same size frame in a Flues model. Could be wrong, others please chime in. Thanks, Jim

[Eldon Goddard]

Well I have a 20 gauge frame for 1909 and a 12 gauge frame from 1920. The 16 ga barrels are from 1924. If that helps any. I know that it would have to be fitted if it fit one of these frames.

[Jim DiSpagno]

Measure the barrel across the middle of the chamber end then measure the breech face of each frame and also the distance between the firing pins. If center to center on the pins are the same then go to across to the barrels and see which are closer in size. I think the 20 ga will be a better match for the 16 ga barrels. Jim