3-Frame, 12-gauge, 32-inch

[winplumber]

Originally Posted by Dave Noreen

In my continuing recording of barrel material markings near the front of the right barrel flat, I note that this gun is marked with just a T without the crescent above and below.

Attachment 90635

I've noted a Twist barrel hammer gun in the 132xxx range also marked with just the T.

My barrels on 144xxx close to this one has just a T

[Mills]

If the stock was not salvageable, it would not be worth a restock

[charlie cleveland]

my 3 frame weighs 9 1/4 lbs all together....it is a 12 ga....it s heavy but handles real good....charlie

[Researcher]

The weight stamp on these 3-frame barrels is 5 4. The originally 32-inch 12-gauge barrels for my 2-frame have a weight stamp of 5 8.

[charlie cleveland]

my gun has the barrels stamped 5-14....these 3 frames were built stout and I use heavy loads in mine....really not to heavy if you have to walk a piece to get to the ducks or what ever....for squirls I use 1 1/4 ounce loads...for ducks and geese I use the 1 1/8 and 1 1/4 steel loads in the 3 inch federal or Winchester shells... for turkey I use the 3 inch shells 1 7/8or 2 ounce loads of lead or the new tungsten loads in 3 inch... charlie

[George "Scott" Davis]

I've probably had 12-15 project guns re-done over the 15 years, one of my most painful learnings is never buy a gun which has been worked on by a amateur gunsmith. You'll can spend thousands of dollar fixing their mistakes before you can start re-doing the gun. I now look for a clean guns which is worn but original.

[winplumber]

Originally Posted by George Davis

I've probably had 12-15 project guns re-done over the 15 years, one of my most painful learnings is never buy a gun which has been worked on by a amateur gunsmith. You'll can spend thousands of dollar fixing their mistakes before you can start re-doing the gun. I now look for a clean guns which is worn but original.

This gun was bought for one reason and one reason only the 32in 12 ga 3 frame barrels . I know what it cost to have guns worked on . Some people spend more on a night out on the town then I did on this gun .

[B. Dudley]

I hope you enjoy it when it arrives.

[Mills]

3 frame 12 gauges are underrated in the Parker world. I love the two I own.

[winplumber]

Originally Posted by Mills Morrison

3 frame 12 gauges are underrated in the Parker world. I love the two I own.

What grades how about some pictures