Quote:
Originally Posted by Stan Hillis
I've been very pleased with Eezox for certain gun parts such as ejectors and trigger parts now, for several years. Hinge pins and knuckles get Lubriplate, sparingly. Clenzoil is working very well for me as a wipe down on the exterior, and (supposedly) won't harm the wood. RIG will always be my go to for long term bore protection. Old formula Hoppes #9 as a bore solvent.
|
I basically use the same procedure as you. Clenzoil for general cleaning and a light coat of Rig Grease to finish. I also hit the bores on shotguns and rifles with wet patches of hoppes first then run a few patches thru to dry. I always run a couple of patches of rig grease in the bores(shotguns and rifles)to finish. As far as the hinge pins go-I like a product called Pro Gold Lubricant. The rig grease would probably work as well.
Threaded Mode