Finally set up the drill press for roll crimping

[Stan Hillis]

It's not a press, Milton. It only resizes the case heads, and you can interchange collets for any gauge. I can do from 10 ga. down to .410. I actually bought it when I used to reload for a short 10. I never had a 10 ga. press and only used hand tools like you describe, except for the Sizemaster. I picked up 3" 10 ga. duck load hulls in blinds and would resize the heads in the Sizemaster, after shortening them to 2 7/8", for use in my LC Smith 10.

It's a valuable tool for someone that picks up used hulls. All presses will resize, but not all use a collet to do it. Collet resizing is absolutely effortless.

[Keith Sirmans]

Originally Posted by Stan Hillis

It's not a press, Milton. It only resizes the case heads, and you can interchange collets for any gauge. I can do from 10 ga. down to .410. I actually bought it when I used to reload for a short 10. I never had a 10 ga. press and only used hand tools like you describe, except for the Sizemaster. I picked up 3" 10 ga. duck load hulls in blinds and would resize the heads in the Sizemaster, after shortening them to 2 7/8", for use in my LC Smith 10.

It's a valuable tool for someone that picks up used hulls. All presses will resize, but not all use a collet to do it. Collet resizing is absolutely effortless.

I need to pick your brain more about that

[Milton C Starr]

Originally Posted by Stan Hillis

It's not a press, Milton. It only resizes the case heads, and you can interchange collets for any gauge. I can do from 10 ga. down to .410. I actually bought it when I used to reload for a short 10. I never had a 10 ga. press and only used hand tools like you describe, except for the Sizemaster. I picked up 3" 10 ga. duck load hulls in blinds and would resize the heads in the Sizemaster, after shortening them to 2 7/8", for use in my LC Smith 10.

It's a valuable tool for someone that picks up used hulls. All presses will resize, but not all use a collet to do it. Collet resizing is absolutely effortless.

I havnt gotten around to resizing 10 gauge hulls, I have been using new hulls.
Resizing my 8 gauge hulls is pretty easy by just using a small amount of mica on the case head.

I have a list of reloading things I want to get this year but we'll see how it goes.