Hole/screw in the front of skeet forearm

[Dean Romig]

It is a reinforcing rod that screws into the front of the forend iron which in turn latches to the reinforced, one piece, forend lug/lower rib.

If not for these reinforcing pieces the overly large beavertail forend with its larger gripping surface would pull the old style forend lug away from the barrels.





.

[Bruce Hering]

Originally Posted by Dean Romig

It is a reinforcing rod that screws into the front of the forend iron which in turn latches to the reinforced, one piece, forend lug/lower rib.

If not for these reinforcing pieces the overly large beavertail forend with its larger gripping surface would pull the old style forend lug away from the barrels..

Thanks Dean. Makes perfect sense.

[Bill Murphy]

No screw in the .410 beavertail.

[Dean Romig]

Originally Posted by Bill Murphy

No screw in the .410 beavertail.

Right Bill.


.

[Bill Murphy]

Dean, tell us about that wood set.

[Dean Romig]

Originally Posted by Bill Murphy

Dean, tell us about that wood set.

I bought them both separately and sold them separately to members here.

The stock is one of the finest aftermarket stocks I have ever seen.

The .410 forend is magnificent. It has a serial number correctly stamped in the bottom of channel but I couldn’t read the whole thing. I don’t know if it’s the real deal but I can’t say it’s not.





.