Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
The only shells I cut down are the 10ga 3 1/2 to 2 7/8. A band saw or a single edge razor blade in a wood dowel set at about a 20 degree angle also works. I've never worried about 2 1/2" 12ga - that 1/4' shorter only raises pressure about 500psi and if you're reloading low pressure shells it won't make much difference. There isn't much published for 10ga so I just use a mild [ 8500psi or less ] 12ga load. With the larger chamber it will be less in the 10. Good luck.
__________________
Paul Harm
The Following User Says Thank You to Paul Harm For Your Post:
Threaded Mode