Quick Question

[Gary Laudermilch]

While I do not reload the 28 I shoot with several guys that do and I know they prefer the Win. case for its longevity. Throwing away good hulls, especially the 28 is like throwing away gold but 1/4 inch is quite a bit of case length discrepancy to deal with. I've loaded many thousands of 20 ga Gun Clubs that are notorious for varying in length but never 1/4 inch. My solution was to split the difference with press settings to get acceptable results on all lengths. May not work for you though.

[Mark Garrett]

Set up for the short shells and live with swirl in the crimp in the long shells ( swirls don't leak shot ,holes in the center do ) although as said before a 1/4" is quite a difference , my not work with that small of diameter hull .

or........... you could cut the long ones down to the same length as the short ones .

[John Taddeo]

Would anyone recommend a shorter wad base to compensate for a crimp that will close and if so which wad to replace a waa28 ??? The 3/4 load is to high to get a crimp..