Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
Rich
I have had good success with the 1 oz. 7625 load recipe you gave me and did as you just suggested and dropped the 7/8 oz. load in it also. Worked real well. Same wad. The crimp is a little indented but closed firm and fine. I'll try with the long shot. I also will try the polywad spreader disk in the 7/8 oz. charge.
I don't want to hammer that nice little 0 frame P grade too much.
Eric
Threaded Mode