LC Smith 10 gauge

[6pt-Sika]

All the pellets didn't hit the target . With the 00 Buck there were 12 pellets in each shell , with the #1 I got 16 pellets per shell and with the #3 Buck I was getting 28 pellets per shell .

These were all non buffered loads I might add . When I tried buffered and not in my W&C Scott I so no appreciable difference in the patterns so for my needs non is fine . Or so it has been so far .

[6pt-Sika]

I had wanted to make some roundball loads for my W&C Scott 10 gauge . But the constriction in the barrels makes it quite hard to get a roundball that will do what I consider well , Perhaps I can pursue the roundball in a REM SP-10 wad with this LC Smith .

[6pt-Sika]

I loaded up 30 rounds with 1 1/4 ounces of #8 shot for a round of skeet tommorrow . This thing is choked not quite as tight as my W&C so I'm intrested to see how it does .

[6pt-Sika]

Well I shot a round with the LC and did okay 23 of 25 . However the extractor doesn't seem to have a very strong spring as it opens okay but before I can get the second hull out it drops . We'll look nto this monday or tuesday I think !

[Drew Hause]

Craig: you should have the First Type (disc & pin) Barrel Check, used 1884-1900 on extractor guns.



They do tend to get gunked up, but removal for cleaning is a challenge



David Williamson on the LCSCA site could help

[6pt-Sika]

Originally Posted by Drew Hause

Craig: you should have the First Type (disc & pin) Barrel Check, used 1884-1900 on extractor guns.



They do tend to get gunked up, but removal for cleaning is a challenge



David Williamson on the LCSCA site could help

Yes that's what it looks like before taking it apart . My gunsmith buddy will get into it Monday I think . I'm hoping its just dirty in there . I haven't figured out how to get on the LC forum short of becoming and LC Assoc member !

[Drew Hause]

You do not need to join the LCSCA to post here http://members.boardhost.com/lcsmith/