Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
I know cut barrels are a killer but what percentage would you knock off for opened chokes. Looked at a VH 16 on a 0 frame but the chokes were cylinder (.001) and I.C. (.006). Barrel length is correct from the book. I do not suspect they left the factory this way since the wall thickness on the right was .020 all the way.
Also, the bores were .676 all the way in both barrels, which I thought was quite large for a 16. Opinions welcomed.
The Following User Says Thank You to Jerry Harlow For Your Post:
DROP IN VALUE FOR OPENED CHOKES
Threaded Mode