Welcome to the new PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms and/or parts; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
My opinion is that if there are air bubbles coming from the rib during the boiling phase they need to be relayed. I wouldn't drill a hole in the rib to relieve water that may have gotten under a leaky rib. The right way to do it is to relay the rib. Weep holes on rust blued barrels indicate a potential problem to me. I carefully check these barrels and if it appears that there aren't any problems, I plug the weep hole with glass bedding compound and then boil them to see if the ribs leak.
The Following User Says Thank You to Tom Flanigan For Your Post:
Threaded Mode