|
 |
 |
||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||
 |
 |
12-15-2010, 05:12 PM
|
#3 | ||||||
|
I spoke with a friend/gunsmith/double gun restorer about this gun and he guesstimated six to eight large one's to bring her back. It'll take someone with some pretty deep pockets to tackle this project---don't worry about me making a play for it---the Mrs. would throw me out in the snow bank!
__________________
Wild Skies Since 1951 |
||||||
|
|
||||||
 |
 |
 |
|
|
|
12-17-2010, 10:34 AM
|
#4 | ||||||
|
How easy is it to find fore end iron to fit?
I see the bid is up to 255$ this morning.
__________________
Hunt ethically. Eat heartily. |
||||||
|
|
|
||||||
|
|
|
|
|
|
12-19-2010, 11:11 AM
|
#5 | ||||||
|
I slapped a #2 hammerless forend on a #7 frame hammer gun and it worked fine for years. I wish that fellow had included pictures of the bores.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
12-19-2010, 11:51 AM
|
#6 | ||||||
|
Very interesting Bill. Was the fore end iron not quite as wide as the front of the frame or do all frames fit all fore end iron? I have only had 2 frame guns. Thanks for the insight.
Jack
__________________
Hunt ethically. Eat heartily. |
||||||
|
|
|
||||||
|
|
|
|
|
|
01-11-2011, 07:36 AM
|
#7 | ||||||
|
Different project gun...but can someone give me width dimension of the 00 frame, 000 frame, and 0000 frame at the forend?
|
||||||
|
|
|
||||||
|
|
|
|
|
|
01-11-2011, 03:29 PM
|
#8 | ||||||
|
Across hinge they are all 1.5 inches. and across the bolsters the 000 is 1 3/4, the 00 is 1 29/32 and the 0 is 1 3/32
|
||||||
|
|
|
||||||
|
|
|
|
|
|
01-11-2011, 07:17 PM
|
#9 | ||||||
|
What I want to know is WHO will take this on Gun Broker Parker GH 16 # 21152259
 I love the description .
|
||||||
|
|
|
||||||
|
|
|
 |
|
|
Hybrid Mode