|
 |
 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
 |
07-11-2021, 04:19 PM
|
#3 | ||||||
|
Perhaps known as a "Live Pigeon Gun".
|
||||||
|
|
||||||
 |
 |
 |
|
|
|
07-11-2021, 04:48 PM
|
#4 | ||||||
|
A gun with an unusual feature that should be left as original. Can you tell us more about this gun?
|
||||||
|
|
|
||||||
|
|
|
| The Following 2 Users Say Thank You to Bill Murphy For Your Post: |
|
|
|
07-11-2021, 06:46 PM
|
#5 | ||||||
|
Here is my original post for the GH I'm referring to.
http://parkerguns.org/forums/showthread.php?t=32537 |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-12-2021, 09:39 AM
|
#6 | ||||||
|
Scott, the GH in the linked picture seems to have a safety.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
07-12-2021, 10:23 AM
|
#7 | ||||||
|
Scott attached are a couple of letters that denote the lack of a safety. This feature was not confined to 12 gauge guns either. I have a factory deleted VH 20 gauge with 32" barrels and have seen other small bores with this feature.
|
||||||
|
|
|
||||||
|
|
|
|
|
|
07-12-2021, 12:05 PM
|
#8 | ||||||
|
Thank you for your replies. Mea culpa on explaining the issue. This shotgun did not come with the internal safety parts so I ordered the parts from Larry Del Grego (great guy). When I tried to install them the stock was not cut out to accept the parts. I now need the stock inletted to put the safety in. Any recommendations for a smith/stock person near me.
I know Brian is booked the rest of the year for taking new work so just looking for other options. And I'm not opposed to shipping it either. Thanks, Scott |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-12-2021, 03:40 PM
|
#9 | ||||||
|
I’m not sure who could do it. I also have a DHE 20 no safety but it appears without pulling the stock off that it may have had one at one time.
You can see the outline of a filler that has been engraved over. This was a 32” gun that has been sent back to Remington multiple times. Had thought about doing what you wish to do and install a safety but ruled that out now. Also thought about sleeving the barrels. ( per Remington codes on the barrels) Barrels cut down to 26” back bored for chokes. Absolutely stunning gun otherwise. |
||||||
|
|
|
||||||
|
|
|
|
|
|
07-12-2021, 05:06 PM
|
#10 | ||||||
|
That plug in the safety slot is a bit more visible than many, but that is how the "no safety" guns were done. If it had a safety from Parker Bros. the word SAFE would be engraved on the tang.
|
||||||
|
|
|
||||||
|
|
|
| The Following User Says Thank You to Dave Noreen For Your Post: |
 |
|
|
Linear Mode
