Thread: Hammer Question
View Single Post
Unread 04-03-2014, 01:54 PM   #6
Member
Matt Valinsky
PGCA Member

Member Info
 
Join Date: Dec 2012
Posts: 282
Thanks: 441
Thanked 242 Times in 69 Posts

Default

Brian, double checked. Took the screw out and the hammer is very tight on the shaft and will not come off without some amount of help. What I see when I look at the hammer and firing pin is something less than 1/16" of seperation.

Also, the hammer moves back and forth from front to back and side to side. When moving towards the firing pin, it does not touch the firing pin. Hope that helps.

Last edited by Matt Valinsky; 04-03-2014 at 02:03 PM.. Reason: Added some info
Matt Valinsky is offline   Reply With Quote