Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   Emblem (https://parkerguns.org/forums/showthread.php?t=9408)

Leroy Gary 01-28-2013 09:24 PM

Emblem
 
1 Attachment(s)
Just picked up a Parker Double barrel and I've been doing research on it.
It seems to be a Grade 0 1901 VHE
The thing I can't find is what is and what was on the the Emblems on each side of the stock as in picture.
They are both worn and impossible to make out. Any help will be appreciated.
Thanks

Richard Flanders 01-28-2013 09:31 PM

That's likely a pin through the cracked stockhead or a cover over a pin of smaller diameter. If you took that out you might find a wood dowel through the head under it.

Daryl Corona 01-29-2013 02:41 PM

Leroy;
I have the exact thing on my VH 12. It's used to cover a stock repair at the head.

Leroy Gary 01-29-2013 05:52 PM

Emblem
 
Thanks for the info. Does that depriciate the value any

calvin humburg 01-29-2013 06:04 PM

Leroy, I would not worry about it get it checked and go hunt. I would check for a crack under the string.

ed good 01-30-2013 10:12 AM

most none factory modifications typically reduce the collector value of a gun.


All times are GMT -4. The time now is 09:32 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org