question
 

on a parker 10 ga hammerless gun..it is a p grade no ejectors...the gun will not cock and hold the hammers back in firing postion...this happened all at once...took the barrels off but see nothing causing problem...any ideas for the problem... charlie

Charlie,

Is the forend on the gun? Has the trigger plate been off recently? Anything done to it just before this trouble started?

Carl.

carl forend on gun trigger plate never been off gun since ive had it...i cleaned the gun took off forearm had to snap thehammers to get barrel off...ive always had tospap the hammers to get barrel off...i put the gun back together and put it in the corner grabbed it this morning to go squirl hunting and went to loadit and noticed the firing pins sticking out...ive had the gun around 30 years and never no problems...dont believe the gun s ever had a screw turned on it... it trys to cock the hammers but does not... charlie

Send it to Keith Kearcher in Bend Oregon for a clean, blow out and make work. You will get away with less cash outlay than anywhere else and get your gun back quick. I he doesn't do what you want on your schedule, let us know.

i was hoping to be able to fix myself if possible...just thought maybe some of you fellas had had this problem before... charlie

I can't imaging both sears having the same problem at exactly the same time so I think it must be in the cocking yoke and slide mechanism. Crud maybe?

Dean, I was thinking the same thing, Crud. Pulll the floorplate off and take a look.