Parker Gun Collectors Association Forums

Parker Gun Collectors Association Forums (https://parkerguns.org/forums/index.php)
-   General Parker Discussions (https://parkerguns.org/forums/forumdisplay.php?f=2)
-   -   Single trigger made from double trigger? (https://parkerguns.org/forums/showthread.php?t=21026)

Ed Blake 03-09-2017 09:30 AM

Single trigger made from double trigger?
 
This is a strange one. The double trigger on GH #117028 has been converted to a single trigger with the back trigger cut off leaving the front trigger to fire both barrels. I do not have this gun in hand so I have not had it apart, but what sort of changes would have to made to the trigger group for something like this? Anyone ever heard of such a thing? This is a restoration project I'm contemplating, but I may be better off sticking a sharp stick in my eye and calling it good.

Dean Romig 03-09-2017 09:43 AM

I'd opt for the stick.....






.

Mills Morrison 03-09-2017 09:44 AM

That is a new one for me. I would be curious as to how it was done and who did the work.

Channing Will 03-09-2017 10:41 AM

Without a picture its difficult to say whose conversion or trigger it is. Is there a selector anywhere? Miller and Infallible conversions were usually marked. It could be a Novotny patent or any number of other uncommon conversions that butchered the sears and other internal parts to work with the factory trigger.

You can usually rest easy with an unaltered Parker factory single trigger as they are typically quite reliable. The same could be said for unaltered Miller conversions. Others exist but they aren't always the most reliable or simple designs.

Bruce Day 03-09-2017 11:36 AM

Not a Frank S. Novotny if that is to what you refer.

charlie cleveland 03-09-2017 02:16 PM

i hope some one will be able to answer this question because i too wonder how they made this coversion...charlie

David Lien 03-09-2017 03:12 PM

I would like to see a picture of the trigger with the stock off. Who knows what this mystery might be??? I would bet that it is repairable (It's a Parker).
David

Eric Eis 03-09-2017 04:35 PM

I would love to see a couple of pictures on this one ! Who knows what the garage gunsmith can come up with. As I don't think this was a manufactured single trigger but who knows maybe........ With pictures maybe Researcher will set in

Brian Dudley 03-09-2017 07:41 PM

Whatever the trigger is, it sounds like some sort of non-selectable trigger that may or may not work.

Depending on how butchered up things are inside, the gun can likely be put back to double triggers without too much fuss.

Mark Riessen 03-09-2017 08:41 PM

Single Trigger ?
 
Just my two cents worth, but I would try to calm down, wait to see the gun, get a letter, if possible, and who knows......... it might work just fine as is. Sometimes you can get a nice surprise. Mark


All times are GMT -4. The time now is 03:26 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 1998 - 2025, Parkerguns.org