PDA

View Full Version : Emblem


Leroy Gary
01-28-2013, 09:24 PM
Just picked up a Parker Double barrel and I've been doing research on it.
It seems to be a Grade 0 1901 VHE
The thing I can't find is what is and what was on the the Emblems on each side of the stock as in picture.
They are both worn and impossible to make out. Any help will be appreciated.
Thanks

Richard Flanders
01-28-2013, 09:31 PM
That's likely a pin through the cracked stockhead or a cover over a pin of smaller diameter. If you took that out you might find a wood dowel through the head under it.

Daryl Corona
01-29-2013, 02:41 PM
Leroy;
I have the exact thing on my VH 12. It's used to cover a stock repair at the head.

Leroy Gary
01-29-2013, 05:52 PM
Thanks for the info. Does that depriciate the value any

calvin humburg
01-29-2013, 06:04 PM
Leroy, I would not worry about it get it checked and go hunt. I would check for a crack under the string.

ed good
01-30-2013, 10:12 AM
most none factory modifications typically reduce the collector value of a gun.