Welcome to the PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
To those of you using the BP1044 wad, have you had any squib loads? It is reported to be undersized compared to the SP10. One commercial maker of 10ga loads told me he puts a X10X under them for that reason. I found that easy to do with 3.5" loading of bismuth, but in 2 7/8" loadings I stick with the SP10.
What does the x10x do to pressure?
It sounds like a good option to help fill the 2 7/8" hull for 1 1/8 ounce loads in the BP1044.
Hybrid Mode