Welcome to the PGCA Forum! As well, since it
is new - please read the following:
This is a new forum - so you must REGISTER to this Forum before posting;
If you are not a PGCA Member, we do not allow posts selling, offering or brokering firearms; and You MUST REGISTER your REAL FIRST and LAST NAME as your login name.
To register: Click here..................
If you are registered to the forum and keep getting logged
out: Please
Click Here...
Welcome & enjoy!
To read the Posts, Messages & Threads in the PGCA Forum, you must be REGISTERED and LOGGED INTO your account! To Register, as a New User please see the Registration Link Above. If you are registered, but not Logged In, please Log in with your account Username and Password found on this page to the top right.
I would try a heat gun but don't get it too hot, the label may melt. Then start on one end and use a paint stick to keep the felt from pulling with the label. Work slowly so not to tear or Strech the felt. There will be old glue that will not come off with the label and cannot be removed and will be visible unless the new label covers it. I have seen some that was removed with no issues left behind....good luck. SXS Ohio
The Following User Says Thank You to Kenny Graft For Your Post:
Hybrid Mode