I'm thinking that the rib will probablyt have to be relayed. That is a lot of leakage. You might want to soak the barrels in acetone for a couple of days and then give it a try. I'm not sure if you are boiling with simple green in the water to convert the red oxide to black. But if you are at this stage, simple green is not recommended. If you are boiling to clean the barrels, it is not necessary. Barrels should be washed down with a a good degreaser like simple green and then rubbed down with acetone. If you are not using Laurel Mountain Forge as a rusting agent, you might want to try that. This product is less sensitive to residual oil or other contamenents.
|
Threaded Mode